 |  |  |  |  |
| DRILL FABRICATION & SUPPORT PRODUCTS All of the products below are available in full sheets (36x48/42x48) or cut to your panel specifications. Tooling pin clearance holes are also available. |
|||||||||||||
| DRILL ENTRY MATERIAL |
DRILL BACK UP MATERIAL |
||||||||||||
|
LE Sheet: LE 400 Lubricated Aluminum Entry Material For high Aspect Ratio Drilling of .0098 and Smaller Diameters |
PINKBOARD: Hard Pink Surface Laminated to Virgin Wood fiber Core Thickness: .093; +/- .006 |
|||||||||||
|
DOSCO ALL-CLAD: Aluminum over Non Abrasive Cellulose Core Thickness: .012; +/- .001 |
SNOBACK ULTIMA: Hard White Surface Laminated to Medium Density Fiberboard Thickness: .098; +/- .006 |
|||||||||||
|
Aluminum Entry Full Sheets, Precut Panels, or Roll Stock Thickness: .007 & .008; +/- .001 |
SB 093: White Gloss Back Up White Gloss Resin Laminated to High Density Wood Fiberboard Thickness: .093; +/- .005 |
|||||||||||
|
DOSCO Phenolic Entry : Brown Phenolic Gloss Thickness: .016 & .024; +/- .002 |
|
DOSCO Phenolic Back Up: Laminate Satin Finish Thickness: .060; +/- .005 |
||||||||||
| DOSCO Melamine Entry: White/Grey Melamine Gloss Thickness: .016 & .024; +/- .002 |
|
DOSCO B650: Pressed Virgin Wood Fiberboard (Tech Board) Thickness: .098; +/- .008 |
|||||||||||
| DOSCO Rout Sheet: Routing Cover Sheet Matte Thickness: .020 +/- .002 |
|
DOSCO B900: Dark Brown Fiberboard (Masonite) Thickness: .126; +/- .012 |
|||||||||||
| RISER PLATES |
|
| CBS Soft Tooling Plate |
Phenolic over Wood Core Thickness: 3/8" |
| TBH Hard Tooling Plate |
Melamine Over Phenolic Thickness: 3/8" & 1/2" |
| ASSORTED PINS |
|||||||||||||||||||||||||||||
| Lengths: 3/8", 1/2",5/8", 3/4" Diameter: Per Specifications *Chamfered Both Ends* |
|||||||||||||||||||||||||||||
|
|
|
|
|
|
||||||||||||||||||||||||
| Dowel Pins |
Lamination Pins |
Tooling Pins |
MicroSection Pins |
Slotted Pins |
Step Pins |
||||||||||||||||||||||||
